PUBLICATIONS

Book

Book Chapters

Dhanesh G. Mohan "Nanostructure Metals and Alloys for Corrosion Prevention", Anti-Corrosive Nanomaterials: Design, Characterization, Mechanisms and Applications, (2023). Anti-Corrosive Nanomaterials: Design, Characterization, Mechanisms and Applications (1st ed.). CRC Press.

Journals

1. Joshi, G. R., Badheka, V. J., Pathak, V., & Dhanesh G. Mohan*, "A comprehensive review of fusion welding for joining copper with stainless steel". Journal of Adhesion Science and Technology, 1–52. 2024. [Link]
2. Zang, B., Liang, B., Chen, J., Gao, X., Yao, D., Dhanesh G. Mohan., Lu, C., & Pang, X. "Polyacrylamide/sodium alginate double network hydrogel with easily repairable superhydrophobic surface for strain sensor resistant to fluid interference", International Journal of Biological Macromolecules, 136251, 2024. [Link]
3. Saiyathibrahim A, Jatti VS, Dhanapal P, Dhanesh G. Mohan*. "Development and characterization of in-situ nickel aluminide reinforced Al-Si matrix composites by stir casting", Engineering Reports. 2024;e12966. [Link]
4. S., Kumar, Dhanesh G. Mohan. "Study on Machinability Behaviour and Simultaneous Optimisation of Multiple Responses Using Taguchi-Based Grey Relational Analysis in End Milling of Aluminum Hybrid Composites", Advances in Materials Science and Engineering, 2024, 6620348, 20 pages, 2024. [Link]
5. Jatti, Vijaykumar S., Tamboli, Shahid, Patel, Parvez, Shaikh, Sarfaraj, Gulia, Vikas, Chaudhari, Lalit R., Saiyathibrahim, A, Dhanesh G. Mohan*, and Murali Krishnan, R. "Optimising the Impact Strength of 3D Printed PLA Components Using Metaheuristic Algorithms" Advances in Materials Science, vol.24, no.2, 2024, pp.5-20. [Link]
6. K. Palanikumar, Elango Natarajan, S. Suresh, Dhanesh G. Mohan, Chander Prakash, Kirtanjot Kaur, "Prospects of Friction Stir Processed Mg Alloys and Composites-Reviews and Suggestions", Journal of Materials Research and Technology, 2024, 2238-7854. [Link]
7. C. Manikandan, B. Rajeswari, Dhanesh G. Mohan, R. M. Aravind, "Multiobjective Optimization of Hard Turning on OHNS Steel Using Desirability and TOPSIS Approaches", Advances in Materials Science and Engineering, vol. 2024, Article ID 9921066, 11 pages, 2024. [Link]
8. Palaniyappan, Sabarinathan, Narain Kumar Sivakumar, S. Rajakumar, Dhanesh G. Mohan, and Mostafizur Rahaman. “Ultrasonic Welding of Cork Wood/PLA Composites: Effect of Welding Factors on Lap Shear Strength Performance.” Journal of Adhesion Science and Technology, (2024), pp. 1–20, [Link]
9. Suresh S, Natarajan E, Dhanesh G. Mohan, Ang CK, Sudhagar S. "Depriving Friction Stir Weld Defects in Dissimilar Aluminum Lap Joints." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2024;0(0). [Link]
10. S. Gopi, Dhanesh G. Mohan*. "Microhardness and corrosion properties of friction stir welded phosphor bronze", The Paton Welding J., vol.2, 2024, pp.3–7. [Link]
11. Gopi, S., Dhanesh G. Mohan* and Natarajan, Elango. "Mechanical and Corrosion Properties of Friction Stir Welded and Tungsten Inert Gas Welded Phosphor Bronze" Advances in Materials Science, vol.23, no.4, 2023, pp.83-98. [Link]
12. C., Pradeep Raja, T. Ramesh, Karthik Babu N. B., Balaji N. S., A. Rajesh Kannan, and Dhanesh G. Mohan*. “Prediction of Formability and Effects of Process Parameters on the Adhesively Bonded Composite Metallic Sheets.” Journal of Adhesion Science and Technology, 2023, 1–17. [Link]
13. A. Zavdoveev, T. Baudin, Dhanesh G. Mohan, D. Pakula, D. Vedel, M. Skoryk, “Basics of additive manufacturing processes for high entropy alloys” Progress in Physics of Metals, 2023, No. 3: 561–592. [Link]
14. Tavadi, Ashokkumar R., N. Nagabhushana, V. N. Vivek Bhandarkar, T. Jagadeesha, Mohammad Rafi Kerur, S. Rudresha, C. Durga Prasad, A. Rajesh Kannan, and Dhanesh G. Mohan*. "Investigation on Mechanical and Sliding Wear Behavior of Pongamia-Oil-Cake/Basalt Fiber-Reinforced Epoxy Hybrid Composites". Arabian Journal for Science and Engineering, 4 September 2023. [Link]
15. Karpagaraj Anbalagan, Sarala Ramasubramanian, Charles David, S. Manivannan, A. Rajesh Kannan & Dhanesh G. Mohan*, " Importance of Shielding and Mechanical Characterization of GTAW On Ti-6Al-4v Alloy Sheet", Welding International, 2023. [Link]
16. A. Zavdoveev, T. Baudin, Dhanesh G. Mohan, D. Pakula, D. Vedel, M. Skoryk, “Basics of additive manufacturing processes for high entropy alloys” Progress in Physics of Metals, 2023, vol.24, pp.1–6. [Link]
17. Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar, 2023, "Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review", Journal of Adhesion Science and Technology. [Link]
18. Manjunatha, C. J., Prasad, C. D., Hanumanthappa, H., Kannan, A. R., Mohan, D. G., Shanmugam, B. K., & Venkategowda, C. 2023. "Influence of Microstructural Characteristics on Wear and Corrosion Behaviour of Si3N4-Reinforced Al2219 Composites", Advances in Materials Science and Engineering, 2023, 1120569. [Link]
19. Zavdoveev, A., Klapatyuk, A., Baudin, T., MacDonald, E., Dhanesh G. Mohan., Oliveira, J., Gajvoronskiy, A., Poznyakov, V., Kim, H. S., Brisset, F., Khokhlov, M., Heaton, M., Rogante, M., Skoryk, M., Vedel, D., Kozin, R., Klochkov, I., & Motrunich, S. 2023. "Non-equimolar Cantor high entropy alloy fabrication using metal powder cored wire arc additive manufacturing", Additive Manufacturing Letters, 100124. [Link]
20. Sharma, Sachin Kumar, Harpreet Singh Grewal, Kuldeep Kumar Saxena, Kahtan A. Mohammed, Chander Prakash, J. Paulo Davim, Dharam Buddhi, Ramesh Raju, Dhanesh G. Mohan*, and Jacek Tomków. 2022. "Advancements in the Additive Manufacturing of Magnesium and Aluminum Alloys through Laser-Based Approach" Materials 15, no. 22: 8122. [Link]
21. A Sasikumar, S Gopi, Dhanesh G. Mohan*, "Prediction of Filler Added Friction Stir Welding Parameters for Improving Corrosion Resistance of Dissimilar Aluminium Alloys 5052 And 6082 Joints", Advances in Materials Science, vol.22, no.3, 2022, pp.79-95. [Link]
22. Niranjan, Y. C., S. G. Channabasavanna, Shankar Krishnapillai, R. Velmurugan, A. Rajesh Kannan, Dhanesh G. Mohan*, and Sasan Sattarpanah Karganroudi. 2022. "The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic: A Comprehensive Review" ,Materials 15, no. 19: 6827. [Link]
23. Sharma S.K, Grewal H.S, Saxena K.K, Mohammed K.A, Prakash C, Davim J, Buddhi D, Raju R, Dhanesh G. Mohan*, Tomków J. "Advancement of Magnesium and Aluminum Alloys in the Role of Additive Manufacturing", Preprints 2022, 2022090459 [Link]
24. Aminzadeh, Ahmad, Sasan Sattarpanah Karganroudi, Mohammad S. Meiabadi, Dhanesh G. Mohan, and Kadiata Ba. 2022. "A Survey of Process Monitoring Using Computer-Aided Inspection in Laser-Welded Blanks of Light Metals Based on the Digital Twins Concept", Quantum Beam Science, MDPI, Vol. 6, no. 2: 19, 2022. [Link]
25. Dhanesh G. Mohan*, S Gopi, Jacek Tomków, Shabbir Memon, "Assessment of Corrosive Behaviour and Microstructure Characterization of Hybrid Friction Stir Welded Martensitic Stainless Steel", Advances in Materials Science, Sciendo, De Gruyter, Vol. 21, Issue 4(70), 2021. [Link]
26. Dhanesh G. Mohan, Chuansong WU, "A Review on Friction Stir Welding of Steels", Chinese Journal of Mechanical Engineering, Springer, (Invited Review), Vol. 34, Issue 137, 2021. [Link]
27. Subramanian K, Murugesan S, Dhanesh G. Mohan*, Tomków J, "Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites", Materials, MDPI, 2021, 14, 6560. [Link]
28. Dhanesh G. Mohan*, Tomków Jacek, Gopi S, "Induction assisted hybrid Friction Stir Welding of dissimilar materials AA5052 aluminium alloy and X12Cr13 stainless steel", Advances in Materials Science, Sciendo, De Gruyter, Vol. 21, Issue 3, 2021. [Link]
29. C J AnandhaKumar, S Gopi*, Dhanesh G. Mohan* and S Shashi Kumar, "Mechanical, Metallurgical and Tribological Properties of Friction Stir Processed Aluminium Alloy 6061 Hybrid Surface Composites", Surface Topography, IOP Science, 2021. [Link]
30. A Sasikumar, S Gopi, Dhanesh G. Mohan*, "Forecasting Process Parameters on Weld Nugget Hardness of Filler Added Friction Stir Welded Dissimilar Aluminium Alloys 5052 and 6082 Joints", Journal of Mechanical and Energy Engineering, Poland, Vol. 5(45), Issue 2, 2021. [Link]
31. C J AnandhaKumar, S Gopi*, Dhanesh G. Mohan* and S Shashi Kumar, "Predicting the Ultimate Tensile Strength and Wear Rate of Aluminium Hybrid Surface Composites Fabricated via Friction Stir Processing using Computational Methods", Journal of Adhesion Science and Technology, Taylor & Francis, 2021. [Link]
32. M Balamurugan, S Gopi*, Dhanesh G Mohan*, "Influence of tool pin profiles on the filler added friction stir spot welded dissimilar aluminium alloy joints", Materials Research Express, IOP Science, 2021. [Link]
33. A Sasikumar, S Gopi, Dhanesh G. Mohan*, "Effect of Welding Speed on Mechanical Properties and Corrosion Resistance Rates of Filler Induced Friction Stir Welded AA6082 and AA5052 Joints", Materials Research Express, IOP science, vol.8(6), 066531, 2021. [Link]
34. Dhanesh G. Mohan* and S Gopi, "Influence of In-situ Induction Heated Friction Stir Welding on Tensile, Microhardness, Corrosion Resistance and Microstructural Properties of Martensitic Steel", Engineering Research Express, IOP science, vol.3, 025023, 2021. [Link]
35. S Gopi and Dhanesh G. Mohan*, "Evaluating the Welding Pulses of Various Tool Profiles in Single-Pass Friction Stir Welding of 6082-T6 Aluminium Alloy", Journal of Welding and Joining, The Korean Welding and Joining Society, 8, 2021. [Link]